Saleofcar.com :Chevrolet

Chevrolet Nova (1969)
for sale

Price: US $18,995.00

Description:

1969 Chevy Nova SS Clone with an Aluminum Head 355 SBC V-8, 4 Speed Manual Transmission, Big 10-Bolt Posi rear end, Power Steering, Power Brakes(Disc Front & Drum Rear), Aluminum Radiator, and front anti-sway bar. The engine was built in August of 2010 and driven approximately 500 miles per year since then. Then in 2011 an 8.5 Big 10-Bolt rear end was installed, from a 1973 Nova, with new 3.23 gears, a new Posi unit, new 4 leaf multi-leaf springs, new shackles, bushings, U-bolts, and U-Joints. In addition, the front and rear frames were connected with weld-in frame connectors to stiffen the chassis. The 3.23 gears pair well with the 3 Groove Saginaw 4 Speed with 3.50, 2.48, 1.65, and 1.00 gear ratios. This set-up gives you a very strong 1st and 2nd gear with a great highway cruising 4th gear. The car runs very reliably with no issues. Gas and Go! The car also has power disc front brakes with drum rear brakes and a front line lock. The electrical system is also up-to-date with a new starter, powermaster alternator, and Optima RedTop battery. The paint is in very good shape overall and has a few(3-4) small nicks/chips and paint bubbles that are not an issue but if someone wants a perfect show car they may want to fix them over time. Otherwise, it's a hard paint finish that shines and is bright red wherever you go. I would estimate that the car was painted 6-7 years ago just before I bought it. I have records on all of the parts used and pictures of every part of the build! Clear NC Title. The car can be viewed in-person in Charlotte, NC.(Please contact me to schedule a time) Don't hesitate to let me know if you have any questions!
355 Small Block Chevy – Built in August 2010
• 4 Bolt Main Block - 4.030” bore (#3970010) - Bored .030”, line honed, decked .010” • 3.48” Stroke Nodular Iron GM Crankshaft (#93426651) • Scat 5.7” Forged 4340 Steel I-Beam Rods with SPS bolts • Speed Pro Duroshield Hypereutectic Flat Top 4 Valve Relief Pistons • Lunati Voodoo 262/268 Hydraulic Cam • Pro Comp 210cc Heads with 64cc Chambers - Vortec Port Design • 2.02” Intake Valves and 1.60” Exhaust Valves • Manley 460 lb. Valve Springs and Doug Herbert Guide Plates and Studs • COMP Cams Magnum Roller Rockers • Professional Products CrossWind Vortec Air Gap Intake Manifold • Holley 1850-3 (4160) - 600CFM / Vacuum Secondaries • GM Performance Parts Distributor with 5.5 mm Accel Wires
$1000 Deposit Due Within 48 Hours of Auction Close - Balance Due Within 7 Days and MUST be Paid via a Bank Certified Check or Wire Before the Car can be Picked Up and the Title Signed Over.

_{update: 2015-08-04}