Saleofcar.com :Chevrolet

Chevrolet Nova (1967)
for sale

Price: US $7,500.00

Description:

Thank you in advance for looking. I did make some subtle changes to the body that I hope you will enjoy. First and foremost I went with a solid cowl under the windshield (somewhat of a modern touch); secondly I removed the stock gas filler location. In my opinion the size of the gas cap and the location, did not give the car that sporty aggressive. My intention was to build a fuel cell modified for fuel injection to mount in the spare tire compartment, but of course there are other options. This car was being built as a driver and is not perfect.
This body style (as you know) is the most popular body style for this car and is a head turner in any condition (I get looks when it is on the trailer, lol). This car looks to have originally been an inline 6 cyl with a manual trans. Original paint color is Gold as was the interior.
The Good
The car is currently in a 2-part/sandable primer ready for final paint prep. All rust patches (no sorry this is not the numbers matching barn find that has never seen a little weather) and body panel replacement has been done. The floors and the trunk floor have all been replaced with new metal. The toe boards were repaired and in my opinion could use a little attention (couple more welds and some sealer). The car has a Heidts mustang II front suspension kit on it with the dropped spindles, GM disc brakes and is sitting pretty. The front clip is used, my goal was to powder coat it again and replace the bushings. The rear of the car is equipped with a brand new TCI 4link set up with adjustable coil over shocks. The kit includes the transmission loop, cross member and sub-frame connectors. The 4 link is attached to a narrowed GM 12 bolt rear end. The rear end needs a new differential unit, I do have a set of Strange 3.73 gears that will be included, and there are Moser axles currently installed. Along with the narrowed rear-end, the inner rear wheel tubs have been relocated out to the rear frame rails to allow a more modern 10+ inch wide wheel. The original core support was replaced (the new one is in the car but not completely bolted together). The car will come with front inner fender panels (need to be properly fitted) as well as a steel 2-inch cowl hood. I have all of the trim I received with the car though some of it needs to be worked a little. The car is equipped with a 5.3 LS truck motor and 4L60E transmission. Motor and trans are a junkyard find 150, 000 unverified miles which I bought to get the car going with plans on building a performance motor.
The Bad
The main concern I had before starting the build was the roof looks like it was replaced at some point. After having it looked over by a few people (including the body man that replaced the original quarters with new Full Quarters) we continued with all necessary panel replacement. The passenger side front fender toward the windshield in the inside next to the hood is a couple millimeters off. I had a repair done and it does not line up perfectly. This can be off-set with a little work on adjusting the hood and fender, but to be perfect may need further attention or replacement. All brake and fuel lines have been removed as I was going to replace with brand new lines and fittings. The electrical has all been removed; the car will come with a new 18 circuit aftermarket wiring harness.
The Ugly
The fabricator that widened the rear wheel tubs did not use the method I had planned and left a recessed channel between the two original pieces. This was not a big deal to me as I planned on dressing up the trunk, likely with a nice carpet kit. The guy that completed the body work laid some unattractive welds in the windshield channel, but of course these will not be seen once the windshield is installed.
Its been a few years since the car was disassembled but this should be accurate
Parts Included Parts Not Included
Door Handles Door panels
Window Cranks/Hardware Front Seat
All glass minus windshield Carpet
Instrument Cluster
Original Dash switches Rear Braking System
All Stainless trim
Original Grill
Steering column
Original pedals (with clutch pedal)
Trunk Molding
3.73 Strange gear set
18 circuit aftermarket wiring harness
Original Windshield wiper set-up
Headlight Bezels
Buyer is responsible for shipping. I will be able to assist as much as possible for shipping. To inspect the vehicle, additional photos or for any questions please feel free to call me, Isaac 714-679-6299.

_{update: 2016-04-29}