Saleofcar.com :Chevrolet

Chevrolet Silverado 1500 (1999)
for sale

Price: US $1,000.00

Description:

1999 CHEVROLET SILVERADO PICKUP -LOWERED-TWIN TURBO!!!!!!
HERE I HAVE MY 99 SILVERADO SHORTBOX PICKUP THAT I AM OFFERING FOR SALE. I PURCHASED THIS TRUCK ABOUT A YEAR AND HALF AGO AND HAVE BEEN WORKING ON THE TRUCK SINCE. I HAVE DONE A COMPLETE FRAME OFF REBUILD ON THIS TRUCK AND SPENT HUNDREDS OFF HOURS AND THOUSANDS OF DOLLARS TO MAKE IT WHAT IT IS TODAY. BELOW I WILL TRY AND LIST EVERYTHING I HAVE DONE.
THE BODY WAS COMPLETELY REMOVED FROM THE FRAME. THE FRAME WAS THEN STRIPPED. TO LOWER THE REAR OF THE VEHICLE IT WAS NECESSARY TO REMOVE THE REAR AXLE, C-NOTCH THE REAR FRAME AND INSTALL A REAR SPRING FLIP KIT. ( TO DO THE LOWERING KIT I PURCHASED A MCGAUGHYS LOWERING KIT.) IN THE FRONT I REMOVED THE FRONT SPINDLES AND INSTALLED LOWERING SPINDLES ALSO FROM MCGAUGHYS. AFTER THIS WORK WAS DONE THE FRAME WAS THEN PRIMED AND PAINTED AND NOW WAS READY FOR ASSEMBLY. DURING ASSEMBLY OF THE CHASSIS I INSTALLED THE FOLLOWING NEW PARTS.
LOWER BALL JOINTS
UPPER CONTROL ARMS AND BALL JOINTS
FRONT WHEEL BEARING AND HUB ASSEMBLY
INNER AND OUTER TIE ROD ENDS
STAINLESS STEEL BRAKE AND FUEL LINES
ALL 4 NEW BRAKE ROTORS
ALL 4 NEW BRAKE CALIPERS
ALL NEW BRAKE RUBBER HOSES
ALL 4 SHOCKS (MCGAUGHYS)
ONCE THE BODY WAS REMOVED THE UNDERCARRIAGE WAS ALL SANDED, CLEANED, STONE GUARDED AND REPAINTED. IT WAS NECESSARY TO REPLACE THE OUTER ROCKER PANELS ON THE CAB. THERE WAS NO OTHER RUST ON THE VEHICLE ANYWHERE!!! ALL DOOR JAMS, INNER FENDERS AND FIREWALL WERE ALSO PAINTED. ONCE THE ROLLING CHASSIS WAS READY THE BODY WAS PUT BACK ON AND THE EXTERIOR OF THE TRUCK WAS PAINTED THE ORIGINAL WHITE. I ALSO ORDERED A SS FRONT BUMPER COVER AND PAINTED IT TO MATCH. ONCE THE VEHICLE WAS PAINTED I INSTALLED ALL NEW HEADLAMPS, MARKERLAMPS, TAILLAMPS, DOOR HANDLES, AND MIRRORS TO JUST GIVE IT THAT EXTRA CLEAN AND NEW LOOK.
AS FOR THE ENGINE. ..
THE ENGINE WAS DISASSEMLED AND TOTALLY GONE THRU. . I INSTALLED A NEW CRANK, CAM, ALL NEW BEARINGS, NEW PISTON RINGS, TIMING GEARS AND CHAIN, OIL PUMP AND SCREEN. WITH ALL GM FACTORY PARTS. THE HEADS WERE SENT OUT. ALL NEW PERFORMANCE VALVES AND SPRINGS WERE INSTALLED. I THEN PURCHASED AND INSTALLED A TWIN TURBO KIT. BEFORE INSTALLING THE KIT I SENT BOTH MANIFOLDS AND DOWNPIPES OUT AND HAD THEM CERAMIC COATED TO KEEP THEM FROM RUSTING AND CHANGING COLORS.
AS FOR THE TRANSMISSION. THE TRANSMISSION WAS SENT OUT TO A TRANSMISSION SHOP AND ALSO TOTALLY GONE THRU. I DID HAVE THEM REPLACE ALL SHIFT SOLENOIDS AND REPLACE ASLLSTEEL AND FRICTION PLATES WITH A HEAVIER DUTY PART. I ALSO REPLACED CONVERTOR WITH A HEAVY DUTY PERFORMANCE CONVERTOR.
ONCE THIS BUILD WAS DONE I SENT THE TRUCK TO A PERFORMANCE SHOP AND HAD IT DYNO-TUNED. TO GET THE TRUCK TO MAKE POWER IT WAS NECESSARY TO REPLACE THE INJECTORS AND FUEL PUMP. THE TWIN TURBO KIT WAS ADVERTISED TO MAKE 500H.P. ON THE DYNO THE TRUCK IS MAKING OVER 425 H.P. AND ABOUT 330 H.P. TO THE REAR WHEELS WITH JUST UNDER 8 LBS OF BOOST.
SO THERE IT IS. . EVERYTHING I HAVE DONE TO THIS TRUCK. . OVERALL THIS IS A NICE RUNNING AND DRIVING TRUCK. THE INTERIOR OF THE TRUCK IS CLEAN. TRUCK HAS CRANK WINDOWS AND NO POWER LOCKS. TRUCK DOES HAVE COLD A/C!!! AND CRUISE CONTROL THAT WORK. I ALSO REMOVED INSTRUMENT CLUSTER AND SENT IT OUT TO HAVE IT TURNED TO 0 MILES WHEN I WAS DONE WITH THE BUILD. IT IS NOW SHOWING JUST OVER THE 500 MILES THAT I HAVE PUT ON IT SINCE THE BUILD. THIS IS A NICE CLEAN TRUCK. I ENCOURAGE ANYONE TO COME TAKE A LOOK AT IT AND I WOULD BE HAPPY TO TAKE YOU FOR A RIDE. . I AM ASKING FOR A DEPOSIT WITHIN 48HRS OF MY AUCTION ENDING AND IF YOU HAVE 0 FEEDBACK PLEASE CONTACT ME BEFORE YOU BID... MY RESERVE IS WELL UNDER WHAT I HAVE INVESTED IN THIS TRUCK AND WELL BELOW WHAT YOU COULD BUILD IT FOR... I HAVE INCLUDED ONE PICTURE OF THE ROLLING CHASSIS AND I HAVE PICTURES THRU THE ENTIRE BUILD WHICH I WILL PASS ON TO THE WINNING BIDDER.
THANKS FOR LOOKING AND LET ME KNOW IF YOU HAVE ANY QUESTIONS. TRUCK IS FOR SALE LOCALLY AUCTION MAY END AT ANY TIME.

_{update: 2016-09-11}