Hummer H2 (2003)
for sale
Price: US $1,000.00
Price: US $1,000.00
The truck can be built in several configurations: 1) single cab long bed2) extended cab with 4 tiny rear doors 6 foot bed (this will require 4 rear door total to harvest and weld together)3) full crew cab, requiring 4 rear doors, making them full size, and adding whatever size bed.
The roof sustained a dent in the front and dents are visible form the top. I have the complete sunroof with headliner section from an SUT.I am including another roof that has a good section if you decide to cut it and repair it or just repair what is there.That is the bronze colored section in the ad.I am including a full suv rear door with glass and most hardware. 4 rear doors, 3 of them are normal full size unlike the cut rust colored on mounted.Flat glass can be cut to accommodate whatever door length size you choose. We planned on a sliding electric back window from a donor Toyota, but that never happened and is not included. You could use the SUT rear door section cut down. Interior parts included except for the following: no seats, door panels, some plastic trim. General statement.Dash parts, knobs, switches, controls are all there. multiple door handles, ac control box, extra wiring...and more. Basically we parted out an SUT to contribute to this one. You are getting most of the complete interior, panels, trim, wiring, headliner, dash plastic, electronics and wiring is left intact for the most part.Consider extra parts a bonus, sell them and buy the missing parts..if any.
The chassis is as if you rolled the truck cab off of it, unplugging most every wire for a clean mate and install of the hummer cab.The front hood had the side marker lights blanked out, but the bondo is old, so re do it or open them back up. The chassis was a Katrina truck, a fed truck that had a pole land on the roof. Chassis was fine, truck still drove and b ought it off ebay for $4500. 6.0 engine was reported to have 18K miles almost 1K shy of the h2 body.
An SUT rear bumper is included, along with a perfect yellow tail gate from an SUT. This was to create the bed using a factory look.
We unbolted the body from the yellow truck, and lifted it off, leaving a perfect ready to go hummer chassis. It too will be listed in a separate auction.
we can store it for 10 days free after the auction ends. Starting Feb 1, 2016 it will go into storage at a rate of 18.00 per day, no insurance for a 30 day contract, then will be auctioned off again.
We can offer to transport it most anywhere in the USA as we have access to central dispatch to get it moved for you.
update: 2016-01-28
Used |
“Blank canvas: do with it what you want. Planting the seeds for you, now finish it. It is mounted on an HD2500 2005 chassis from an extended cab Chevrolet 4X4 truck. The cab mounts were a perfect match below the A pillar. Fronts at core support need to be moved inward just a bit. Since the back half of the cab was not closed in, no mounts yet. This can go the way we planned, a single cab with a 9 foot bed. Leaving the 5 speed and 6.0 in it. Plans can change, as a turbo diesel Duramax can be stuffed in there. We needed a shop truck to haul a specific product. The bed had its spot welds removed and the sides scrapped. Now ready for new skin to match the cab profile.” |
VIN (Vehicle Identification Number): | 5GRGN23U73H119694 | Year: | 2003 |
Body Type: | Cab & Chassis | Make: | Hummer |
Warranty: | Fawk NO! | Model: | H2 |
Vehicle Title: | Clear | Trim: | one of a kind pick up truck |
Options: | 4-Wheel Drive | Engine: | 6.0 stock |
Safety Features: | Anti-Lock Brakes | Drive Type: | 4WD |
Power Options: | Air Conditioning, Cruise Control, Power Locks, Power Windows | Mileage: | 19,230 |
Fuel Type: | Gasoline | Number of Cylinders: | 8 |
For Sale By: | Private Seller | Transmission: | Manual |
Disability Equipped: | No |