Nash 600 (1947)
for sale
Price: US $200.00
Price: US $200.00
THIS IS A GOOD HEAD START ON A 1947 NASH COUPE' MODEL 600 GASSER PROJECT OR USE AS A PARTS CAR, THESE CARS & PARTS ARE GETTING MORE & MORE SCARCE, CAR IS BEING SOLD WITH A BILL OF SALE ONLY, ALL YOU SEE IN PICTURES IS EVERYTHING THAT IS THERE, ALL WORK THAT HAS BEEN DONE IS PROFESSIONALLY DONE, THIS IS A ROLLER, NO MOTOR OR TRANSMISSION, ENGINE MOUNT PADS ARE WELDED ON TO ACCOMMODATE ANY RUBBER BISCUIT TYPE MOTOR MOUNTS, BODY WORK NEEDS TO BE DONE BUT THERE HAS ALREADY BEEN PROFESSIONAL WORK DONE. RUSTY TRUNK FLOORS HAVE BEEN CUT OUT AND NEW PANELS HAVE BEEN LAID INTO THE TRUNK AND ARE A NICE FIT, THE TRUNK LID HAS SOME WORKABLE DENTS, RUSTY PASSENGER AREA FLOORS HAVE NOT BEEN CUT OUT YET, REAR FENDER WELLS HAVE BEEN NICELY RADIUSED, LOWER REAR QUARTER PANELS HAVE BEEN PATCHED BUT NOT FILLED, THE BOTTOM OF THE DOORS NEED TO BE PATCHED, ROCKER PANELS HAVE BEEN MANUFACTURED, NICE JOB DONE ON THOSE, NEW FRONT FRAME RAILS WITH NEW SHOCK MOUNTS AND NEW SHOCKS, THERE IS A USED EARLY FORD PICKUP FRONT AXLE, NEW FRONT LEAF SPRINGS, SHACKLES & HANGERS. IT HAS A 10 BOLT GM REAR END WITH NEW U-BOLTS. ROLL BAR KITS FOR 1942-1948 CHEVY BOLT IN, THIS HAS THE ORIGINAL NASH FACTORY FRAME WHICH IS FULLY BOXED WITH NO X MEMBER. THE INTERIOR HAS BEEN PRETTY MUCH STRIPPED INCLUDING THE DASH, BOTH WINDSHIELDS ARE INCLUDED FOR PATTERNS. THERE ARE NO FRONT BREAKS OR DRUMS, FRONT AND REAR. THE PLAN WAS TO USE SPEEDWAY DISC BREAK KITS. YOU WILL NEED INTERIOR WINDOW GARNISH MOLDINGS BUT THE REAR WINDOW GARNISH MOLDING IS INSTALLED ALONG WITH THE HARD TO FIND REAR CURVED TEMPERED GLASS WINDOW IN GOOD CONDITION, ONE OF THE PICTURES SHOWS MOST OF THE TRIM PARTS THAT COME WITH THE CAR, OTHER PICTURES SHOW FRONT FENDERS AND SIDE PANELS ARE TACK WELDED FROM THE INSIDE AND THE SEAMS NOT FILLED SO WHEN THE FLIP NOSE IS DOWN IT DOES NOT LOOK LIKE ONE PIECE, THESE CARS ARE LIGHT 2, 600 - 2, 700 POUND RANGE FROM 1942-1948. STOCK WITH THE BACK SEAT THIS CAR IS STILL 100 POUNDS LIGHTER THAN A 1940 FORD COUPE'. I RAN A 1940 FORD GASSER IN THE LATE 60'S, SO I'M SURE OF IT. TIME GOES ON BUT WEIGHT IS STILL THE ENEMY OF ANY DRAG CAR. I AM NOT THE ONE WHO STARED TO BUILD THIS CAR, I TRIED TO BE AS ACCURATE AS POSSIBLE WITH THE DESCRIPTION AS POSSIBLE, I AM NOT NOT ASKING A RIDICULOUS PRICE LIKE OTHER CARS LISTED ON EBAY, JUST A FAIR ONE. THANKS FOR LOOKING AT THIS LISTING, PAYMENT WITHIN 7 DAYS OF SALE AND CAR MUST BE PICKED UP WITHIN NO LATER THAN 7 DAYS OF SALE, MAKE ARRANGEMENTS FOR PICKUP OF VEHICLE, CALL FOR ARRANGEMENTS FOR A LITTLE LONGER PICKUP DATE IF NEEDED, THIS COMES WITH A BILL OF SALE ONLY, VIN# K177416 USE THIS LOT OF PARTS FOR YOUR
GASSER , RESTORATION, RESTO-ROD, HOT ROD OR CUSTOM PROJECT, CALL FOR INSTRUCTIONS ABOUT PAYMENT METHODS WHEN EVERYTHING IS PICKED UP . QUESTIONS? 860-830-0775 THANKS FOR LOOKING AT THIS AND ALL OF MY OTHER ITEMS! PLEASE TAKE A PEEK AT MY STORE ALSO, MORE GOOD STUFF, PLEASE DON'T FORGET TO LEAVE FEEDB
update: 2015-06-03
Used |
“BODY WORK NEEDS TO BE DONE BUT THERE HAS ALREADY BEEN PROFESSIONAL WORK DONE. RUSTY TRUNK FLOORS HAVE BEEN CUT OUT AND NEW PANELS HAVE BEEN LAID INTO THE TRUNK AND ARE A NICE FIT, THE TRUNK LID HAS SOME WORKABLE DENTS, RUSTY PASSENGER AREA FLOORS HAVE NOT BEEN CUT OUT YET, REAR FENDER WELLS HAVE BEEN NICELY RADIUSED, LOWER REAR QUARTER PANELS HAVE BEEN PATCHED BUT NOT FILLED, THE BOTTOM OF THE DOORS NEED TO BE PATCHED, ROCKER PANELS HAVE BEEN MANUFACTURED, NICE JOB DONE ON THOSE.SEE COMPLETE DESCRIPTION FOR ALL DETAILS.” |
VIN (Vehicle Identification Number): | K177416 | Year: | 1947 |
Interior Color: | Tan | Make: | Nash |
Number of Cylinders: | N/A | Model: | 600 |
Transmission: | N/A | Trim: | BASE COUPE' 2 DOOR |
Body Type: | Coupe' | Engine: | NO ENGINE |
Warranty: | Vehicle does NOT have an existing warranty | Drive Type: | 2 WHEEL |
Vehicle Title: | Clear | Mileage: | 99,999 |
Fuel Type: | Gasoline | Exterior Color: | Gray |
For Sale By: | Private Seller |